Bosch 800 Series Instrukcja obsługi i konserwacji - Strona 8

Drukuj stronę

Bosch 800 Series Instrukcja obsługi i konserwacji

Audible signal

Switching on audible signal

Press and hold the "Light" button for 5 seconds.

An audible signal sounds and "Snd" appears on the

display panel for 3 seconds.

Switching off audible signal

Press and hold the "Light" button for 5 seconds.

"Snd" appears on the display panel for 3 seconds.

Cleaning and maintenance

WARNING

To avoid risk of fire and explosion do not use

flammable liquids or solvents. Always unplug or

disconnect the appliance from the power supply

before servicing.

Do not use steam cleaners to clean the appliance.

Hidden surfaces may have sharp edges. Use caution

when reaching behind or under appliance.

WARNING

RISK OF BURNS

The appliance will become hot when in use,

especially in the area surrounding the bulbs. Let

cool before cleaning.

WARNING

RISK OF ELECTRIC SHOCK

Penetrating damp can cause electric shock. Only

clean appliance with a damp cloth. Prior to cleaning,

pull the plug or flip the breaker in the fusebox.

Cleaning agents

To prevent various surfaces from becoming damaged

due to incorrect cleaning agents, follow the specifications

given in the table. Do not use

cleaning agents that are harsh or scouring,

cleaning agents with high alcohol content,

hard scouring pads or sponges,

high-pressure cleaners or steam cleaners.

Thoroughly rinse all new sponges before use.

Overheating protection

The appliance is equipped with overheating protection. If

high temperatures are measured on the appliance, the

appliance switches automatically to the highest ventilator

setting until the temperature drops again.

If the hood is switched on, the highest ventilator setting

is set. If the temperature drops again, the appliance

switches back to the previously-selected ventilator

setting.

If the hood is switched off, the appliance switches

automatically to the highest ventilator setting. If the

temperature drops again, the appliance switches off

automatically.

While the overheating protection is active, "Auto"

appears on the display panel. The ventilator setting

cannot be reduced in this time.

Observe all instructions and warnings accompanying

cleaning agents.

Area

Cleaning agents

Stainless steel

Warm soapy water: Clean with a

non-abrasive, non-sponge dish towel

and dry with a clean, soft towel.

Only clean stainless steel with the

grain.

Specific products for stainless

steel care are available for purchase

from customer service or from

specialized retailers. Apply a thin layer

of the care product with a soft cloth.

Black Stainless

Use a soft, dry towel. If the dirt on

steel

the surface is not easy to clean only

with the towel use warm water diluted

with a neutral cleansing agent.

NEVER use stainless steel cleaner.

Use only a non-abrasive, mild cleansing

soap and water solution for cleaning

the Black Stainless Steel.

Varnished sur-

Warm soapy water: Clean with a

faces

non-abrasive, non-sponge dish towel

and dry with a clean, soft towel.

Do not use stainless steel

cleaner.

Aluminum and

Glass cleaner:

plastic

Clean with a soft cloth.

Glass

Glass cleaner:

Clean with a soft cloth. Do not use

a glass scraper.

Controls

Warm soapy water: Clean with a

non-abrasive, non-sponge dish towel

and dry with a clean, soft towel.

Risk of damage to electronics

due to permeating damp. Never

clean controls with a wet cloth.

Do not use stainless steel

cleaner.