Bosch 800 Series Instrukcja obsługi i konserwacji - Strona 14

Drukuj stronę

Bosch 800 Series Instrukcja obsługi i konserwacji

Telescopic Rack (some models)

To insert the telescopic rack into the oven:

1. Slide the rack in evenly until the rear of the rack is

about 2 inches from the back of the oven.

2. Tilt the front of the rack up about 3/4 of an inch (A) and

finish pushing the rack all the way back (B).

Note: Avoid striking the oven light cover glass when

pushing the rack into position.

3. The back of the telescopic rack drops into place.

4. Pull the rack forward to engage the bottom of the rack

onto the rear of the rack position guide.

5. Lower the front of the rack to finish seating it on the

rack guide. The rack should feel stable when properly

seated.

6. Slide the movable part of the telescopic rack in and out

a few times to make sure it is able to move freely and

that the non-moving part of the telescopic rack is

securely anchored.

9 CAUTION

To avoid possible injury or damage to the appliance,

ensure the telescopic rack is installed exactly per

installation instructions and not backwards or upside

down.

To remove the telescopic rack from the oven:

1. Lift the front of the telescopic rack assembly about 1/2

inch and push the rack to the rear about 3/4 inch. This

allows the rack to disengage from the rack position

guide.

2. Lift the rear of the telescopic rack assembly so it clears

the rack position guide and gently pull the rack from the

oven.

Note: Take care to avoid pulling the rack unevenly

which will cause it to bind during removal, catching on

the oven walls.

English 11

Before Using the Appliance

for the First Time

•

Remove all packing materials and labels from range.

Remove packing materials from inside the oven and

inside the drawer.

•

While cool, wipe with a clean, damp sponge and dry.

•

There may be a slight odor during first uses; this is

normal and will disappear.

•

Optimum cooking results depend on proper cookware

and bakeware being used.

•

Read and understand all safety precautions and Use

and Care Manual information prior to operating.