Bosch CDG634A 0 Series Podręcznik użytkownika i instrukcje instalacji - Strona 18

Przeglądaj online lub pobierz pdf Podręcznik użytkownika i instrukcje instalacji dla Piekarnik Bosch CDG634A 0 Series. Bosch CDG634A 0 Series 40 stron.
Również dla Bosch CDG634A 0 Series: Instrukcja obsługi (36 strony)

Drukuj stronę
en Cleaning and servicing
¡ If you press
​ ⁠ while the descaling process is in pro-
gress, the process will be stopped and the appli-
ance will shut down. When you switch the appliance
back on, you will need to rinse it twice in order to re-
move any remaining descaling solution. The appli-
ance cannot be used for other applications until the
second rinse cycle is complete.
¡ When you have five or fewer uses remaining for
cooking with steam, your appliance will remind you
to descale it.
Step
Descaling → Page 18
First rinse cycle
→ Page 18
Second rinse cycle
→ Page 18
Starting the descaling process
It takes approx. 30 minutes to descale your appliance.
ATTENTION!
Using non-recommended descaler may damage the
appliance
Only use the liquid descaler recommended by us
▶
for the descaling programme. The time the descaler
needs to be left to work depends on the product
used.
If descaling solution comes into contact with the control
panel or other delicate surfaces, it will damage them.
Remove descaling solution immediately with water.
▶
Mix 300 ml water with 60 ml liquid descaler to
1.
make a descaling solution.
Remove the water tank and pour the descaling solu-
2.
tion into it.
3.
Slide the water tank all the way into the appliance.
Close the appliance door.
4.
Press
​ ⁠ .
5.
Press
​ ⁠ .
6.
Press ​ ⁠ to start the descaling process.
7.
Running the first rinse cycle
Remove the descaling solution from the evaporator
1.
dish using the cleaning sponge provided and then
thoroughly rinse the cleaning sponge with water.
Remove the water tank and rinse thoroughly.
2.
Fill the water tank with water and then slide it back
3.
into the appliance.
Close the appliance door.
4.
Press ​ ⁠ .
5.
a The appliance will rinse itself for approx.
20 seconds.
Open the appliance door.
6.
Remove the remaining water from the evaporator
7.
dish using the cleaning sponge.
8.
Proceed to the second rinse cycle. → Page 18
Running the second rinse cycle
Remove the water tank and rinse thoroughly.
1.
Fill the water tank with water and then slide it back
2.
into the appliance.
Close the appliance door.
3.
Press ​ ⁠ .
4.
a The appliance will rinse itself for approx.
20 seconds.
18
Duration
Approx. 30 min
20 s
20 s
Remove the remaining water from the evaporator
5.
dish using the cleaning sponge.
Wipe down the cooking compartment using the
6.
cleaning sponge and then dry with a soft cloth.
Switch off the appliance.
7.
a The appliance is now ready for use again.
Descaling the evaporator dish
If necessary, you can descale the evaporator dish sep-
arately. To do this, you can either use your appliance's
descaling function or you can descale the evaporator
dish manually.
ATTENTION!
Using non-recommended descaler may damage the
appliance
Only use the liquid descaler recommended by us
▶
for the descaling programme. The time the descaler
needs to be left to work depends on the product
used.
If descaling solution comes into contact with the control
panel or other delicate surfaces, it will damage them.
Remove descaling solution immediately with water.
▶
Mix 100 ml water with 20 ml liquid descaler to
1.
make a descaling solution.
Completely fill the evaporator dish with descaling
2.
solution.
Fill the water tank with water and then slide it all the
3.
way into the appliance.
Close the appliance door.
4.
5.
Start the descaling process. → Page 18
12.7 Appliance door
To clean or remove the door panels, you can detach
the appliance door.
The appliance's door hinges each have a locking lever.
When the locking levers are closed, the appliance door
is secured in place. The appliance door cannot be re-
moved when it is secured like this.