Electrolux Clarus Vibe WH6-14LAG Instrukcja instalacji - Strona 21
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Spryskiwacz Electrolux Clarus Vibe WH6-14LAG. Electrolux Clarus Vibe WH6-14LAG 32 stron. Washer extractor
Drukuj stronę9.3 Machine connection with ferrite
To obtain approved level of EMC, it is mandatory to use the ferrite which is enclosed with above listed models. (Note
that this is only valid for those models).
Before connecting to the machine, the protective earth (PE) wire shall be wrapped around the ferrite.
Prepare the power cord by making sure the protective earth (PE) wire is longer than the other wires according to the
table.
Wire size
AWG14 or 2.5 mm
AWG12 or 4 mm
AWG10 or 6 mm
AWG8 or 10 mm
AWG6 or 16 mm
AWG4 or 25 mm
When the power cord has been prepared according to the table, wrap the protective earth (PE) wire through the fer-
rite and then connect all wires according to the "Machine connection" section.
Installation manual
2
2
2
2
2
2
L1
T1
L
230 mm
250 mm
270 mm
290 mm
330 mm
490 mm
L2
L3
N
N1
T2
T3
21
x times through
x 4
x 4
x 4
x 4
x 4
x 4
fig.X01516
fig.X01360A