Electrolux EFLS517STT Instrukcja instalacji - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Spryskiwacz Electrolux EFLS517STT. Electrolux EFLS517STT 44 stron. Front load

Reversing Door

B) Removing Door Lock and Plastic Hole Cover

1. Locate and remove both screws from

door lock. Save screws for later.

2. Rotate the lock as you pull it out through

the front panel. Take care not to pull too

hard or too far as the lock is still attached

to the wiring harness.

3. Disconnect the wiring harness terminal

from the door lock. Set the door lock aside

for reinstallation later.

4. Pry upward the bottom of the plastic hole

cover to release it from the front panel.

You may have to use a nan-scratching

plastic knife if you are unable to release

it manually. Slide the cover down slightly

and remove it from the front panel.

C) Reinstalling Lock and Hole Cover

1. Move the plastic cover to the other side of

the front panel. Position the cover so the

"hook" is at the bottom. Insert hook into

lower slot, slide the cover down, and press

upper retention tabs into opening until

they snap into place.

2. Insert wiring harness into door lock.

3. Insert door lock into front panel and

reinstall door lock screws.

D) Reversing Door Assembly

1. Locate nine screws on inner door ring.

Remove each and save for reinstallation

later. Remove inner door (with hinge) and

carefully set aside.

x 9