Bosch HBC36D753W Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Piekarnik Bosch HBC36D753W. Bosch HBC36D753W 36 stron.
Drukuj stronę
Operating the appliance
In this section, you can read about
how to fill the water tank
■
how to switch the appliance on and off
■
what to note after each use
■
how you can use the recommended settings
■
Filling the water tank
When you open the appliance door, you will see the water tank
on the right-hand side.
Caution!
Use of unsuitable liquids may damage the appliance
Only use fresh tap water, softened water or uncarbonated
■
mineral water.
If your tap water is very hard, we recommend that you use
■
softened water.
Do not use distilled water, highly chlorinated tap water
■
(> 40 mg/l) or other liquids.
You can obtain information about your tap water from your
water supplier. The water hardness can be checked with the
test strips enclosed.
Fill the water tank before each use:
Open the appliance door and take out the water tank (fig. A).
1.
Fill the water tank with cold water up to the "max" mark (fig.
2.
B).
$
Close the tank cover until you feel it engage.
3.
Slide in the water tank all the way (fig. C).
4.
&
The tank must be flush with the water tank recess (fig. D).
Switching on the appliance
:
Risk of scalding!
When you open the appliance door and remove the cooking
containers, hot liquids may squirt out because the cooking
containers may have warped. When opening, do not stand too
close to the appliance. Open the appliance door carefully.
Remove the cooking container carefully. Keep children at a
safe distance.
10
%
P D [
'
Note: Always use the cooking container and wire rack in their
standard position (not the other way up).
Press the
button to switch on the appliance.
%
1.
The button description appears in the display for
approximately 4 seconds. The display then switches
automatically to the "Types of heating" menu.
Or press the
å
button to go directly to the "Types of heating"
menu.
Turn the rotary selector to set the desired type of heating.
2.
7\SHV RI KHDWLQJ
7RSERWWRP KHDWLQJ
+RW DLU
&
&
Press the
X
button.
3.
The default temperature is highlighted.
Turn the rotary selector to set the desired temperature.
4.
Type of heating
Temperature range Default cooking
Hot air
30 - 230 °C
Steam
35 - 100 °C
Combination
120 - 230 °C
Reheat
100 - 180 °C
Prove
35 - 50 °C
Defrost
35 - 60 °C
Slow cooking
60 - 120 °C
Plate warming
30 - 70 °C
Keep warm
60 - 100 °C
For types of heating involving steam, you must now set a
cooking time (see also section: Time-setting options).
Press the
0
button.
5.
The default cooking time is highlighted.
Turn the rotary selector to set the required cooking time.
6.
Press the
button to start the cooking operation.
n
7.
The appliance heats up.
For the Steam type of heating, the cooking time only starts
counting down after the heating-up time is complete.
"Fill water tank?" message
This message appears if you set a type of heating and the
water tank is only half full.
If you think that the water in the water tank is sufficient for the
cooking procedure, you can start the appliance. If not, fill the
water tank to the "max" mark, slide it back in and start the
appliance.
Current temperature
Press the
button.
°
The current temperature is displayed for 3 seconds.
Changing the temperature
You can change the temperature at any time.
Press the
X
or
Y
button until the temperature is
1.
highlighted.
time
-
20 minutes
30 minutes
10 minutes
30 minutes
30 minutes
-
-
-