Electrolux EN6T4722AF Podręcznik użytkownika - Strona 23
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Spryskiwacz Electrolux EN6T4722AF. Electrolux EN6T4722AF 36 stron.
Drukuj stronę
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Inicio/Pausa
again.
The washing programme continues.
11.10 Cancelling a running
programme
1. Press the button On/Off to cancel the
programme and to deactivate the
appliance.
2. Press the button On/Off again to
activate the appliance.
If the SensiCare System has
completed and the water
filling has already started,
the new programme starts
without repeating the
SensiCare System. The
water and the detergent are
not drained out in order to
avoid waste.
There is also an alternative way of
cancelling:
1. Rotate the selector knob to the "Reset"
position
.
2. Wait for 1 second. The display shows
.
Now, you can set a new washing
programme.
11.11 Opening the lid - Adding
garments
If the temperature and level
of the water in the drum are
too high and/or the drum is
still rotating you should not
open the lid.
While a programme or the delay start
operates, the appliance lid is locked. The
display shows the indicator
1. Touch the Inicio/Pausa
The indicator
2. Wait until the lid lock indicator
stops flashing and goes off. Open the
appliance lid and drum doors. If
necessary, add or remove the items.
Close the drum door and lid. Touch
.
button.
starts flashing.
the Inicio/Pausa
programme or the delay start
continues.
11.12 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active). The display shows
The indicator of the Inicio/Pausa
button goes off.
The lid unlocks and the indicator
goes off.
1. Press button On/Off to deactivate the
appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
shows the end of the
previous programme. Turn
the programme dial to set a
new cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the lid and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
11.13 Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the water
of the last rinse, the programme is
completed, but:
• The time area shows
display shows the lid locked
• The drum still turns at regular
intervals to prevent creases in the
laundry.
• The lid stays locked.
• You must drain the water to open the
lid:
1. If necessary, touch the Centrif.
button to decrease the spin speed
proposed by the appliance.
ENGLISH
23
button. The
and the
.