Draytek VigorSwitch P2282x Skrócona instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przełącznik Draytek VigorSwitch P2282x. Draytek VigorSwitch P2282x 12 stron. L2+ managed switch

Drukuj stronę
DC Power In
(P2282x)
DC Power In
(G2282x)
Interface
RST
Scan
RJ 45 LNK/ACT Port 1 ~ 24
PoE for Port 1 ~ 24
SFP LNK/ACT Port 25 ~ 28
0
The switch is in the master mode of stacking.
The switch is in slave mode or provided the highest
priority.
1
It serves more than 2 stacking members as the
"Secondary Master".
2 to F
The switch is in the slave mode of stacking.
r
The switch does not join the stacking members or joins
but over the number of members.
Off
The device is in stand alone mode.
DC+12V (Vin1) - The power supply with +12VDC is good.
On (Green)
DC+54V (Vin2) - The power supply with +54VDC is good.
Off
The device is not ready or is failed.
On (Green)
DC+12V (Vin1) - The power supply with +12VDC is good.
Off
The device is not ready or is failed.
Description
Factory reset button.
Press it to reboot the system. (<5 seconds)
Press it to reset the system with factory default
settings. (>5 seconds)
Stacking scan button.
Press it to auto-scan the join stacking members.
Port 1 to Port 24 can be used for Ethernet connection
and PoE connection, depending on the device
connected.
Port 25 to Port 28 are used for fiber connection.
3