Electrolux EW 1078 F Instrukcja obsługi - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz Electrolux EW 1078 F. Electrolux EW 1078 F 26 stron.
Również dla Electrolux EW 1078 F: Instrukcja obsługi (24 strony)
End of programme
When the door locked light has gone out, the door
can be opened. The light
programme progress display illuminates.
A flashing zero appears on the display.
The buzzer sounds.
Switch the machine off and remove the laundry.
Turn the programme selector dial to O.
Altering a programme
You can alter the programme before it starts.
When the programme has started, you can only
reset it by turning the programme selector dial to O
and then you can select the new programme.
Start it by depressing the START/PAUSE button.
Interrupting a programme
Depress the START/PAUSE button to interrupt a
programme which is running, the corresponding light
starts to flash. To restart the programme depress
START/PAUSE again.
Cancelling a programme
Turn the selector dial to O to cancel a programme
which is running: three flashing dashes appear on
the display. Now you can select a new programme.
Opening the door after the programme
has started
First set the machine to PAUSE by pressing the
START/PAUSE button.
The door can be opened when the door locked light
has gone out.
If the door does not open, this means that the
machine is already heating or drying, that the water
level is above the bottom edge of the door or that the
drum is turning.
During drying the door can be opened only the first
10 minutes and at the end of drying (after the cooling
phase).
If you cannot open the door but you need to open it
you have to switch the machine off by depressing the
ON/OFF button
. After about 2 minutes the door
can be opened (pay attention to the water level and
temperature!). To restart the programme depress
ON/OFF button again after closing the door.
(END) on the
Programme information
Washing programme for machine washable wool as
well as for hand washable woollens and delicate
fabrics with the "hand washing" care symbol.
Select this programme for heavily soiled laundry.
Pour the detergent into the compartment
This programme is not suitable for wool.
The machine performs a soak at 30°C and stops with
the water in the drum. The water can be emptied out
in 2 ways:
• Draining only by depressing the START/PAUSE
button.
• Draining and spin: turn the programme selector
dial to O, select programme "F" (spin), reduce
eventually the spin speed by means of button
and depress START/PAUSE button.
Important!
• If the water is not emptied out within 18 hours, the
machine empties automatically.
• At the end of the soak (after having emptied out
the water) you can select the washing programme.
Turn first the programme selector dial to O, then
select the programme and depress the
START/PAUSE button.
With this programme it is possible to rinse and spin
garments which have been washed by hand.
The machine performs 3 rinses, followed by a final
spin at 1000 r.p.m.
The spin speed can be reduced by depressing
button
.
Hand washed garments can be softened with this
programme.
The machine performs 1 rinse, followed by a final
spin at the max. speed, which can be reduced by
depressing button
14
Wool
A = Soak
B = Rinses
C = Softeners
.
.