Alemlube SP610 Instrukcja techniczna dla właściciela
Przeglądaj online lub pobierz pdf Instrukcja techniczna dla właściciela dla Narzędzia Alemlube SP610. Alemlube SP610 3 stron. Propane hose reel
Drukuj stronę
Description
The new SP610 Propane hose reel from Alemlube is a genuine industrial quality welding reel ideal for all general welding
applications undertaken by contractors, fabricators and people involved in the construction and industrial fields. Featuring impact
resistant UV stabilised covers for maximum durability and an automatic and positive latching mechanism, the SP610 can easily
be mounted on the wall or ceiling and can be carried in utes and service vehicles.
Specifications
Uses
Hose Length
Materials
Pressure
Dimensions
Inlet/Outlet
Working Temp
Safety Precautions
General Safety Rules
WARNING:
Read and understand all instructions.
WARNING:
The warnings, cautions, and instructions discussed
in this instruction manual cannot cover all possible conditions
or situations that could occur. It must be understood by the
operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
Hose Reel Safety Precautions
1 Use proper eye protection when assembling and using the hose reel.
2 Keep children away from the work area.
3 Personal injury and/or equipment damage may result if proper safety
precautions are not observed.
4 Ensure that reel is properly installed before connecting input
and output hoses.
5 Bleed fluid/gas pressure from system before servicing reel.
6 Before connecting reel to supply line ensure that pressure
does not exceed maximum working pressure rating of reel.
7 Remember, even low pressure is very dangerous
and can cause personal injury or death.
8 If a leak occurs in the hose or reel, remove system
pressure immediately.
9 Ensure that reel, hose, and equipment being service
are properly grounded.
10 If reel ceases to unwind or rewind, remove system
pressure immediately.
11 Do not pull or jerk on hose.
WARNING:
Exposure of skin directly to pressurized air,
or fluids could result in severe bodily injury.
NSW/ACT
QLD/PNG
TEL: (02) 9677 1555
TEL: (07) 3204 9166
FAX: (02) 9675 1155
FAX: (07) 3204 1224
OWNER'S TECHNICAL MANUAL
Propane Hose Reel
Propane welding
20m x 6mm ID rubber hose and 0.9 lead in hose
Plastic UV stabilised cover & steel spring
300 psi (20 bar)
630mm (L) x 442mm (H) x 261mm (W)
Lead in hose: 5/8" UNF (f) fitting
-30°C ~ 60°C
VIC/TAS
TEL: (03) 8787 8288
FAX: (03) 8787 8266
Visit our website at
www.alemlube.com.au
WA
SA/NT
TEL: (08) 9302 4199
TEL: (08) 8241 7111
FAX: (08) 9303 2095
FAX: (08) 8241 7011
or
www.alemlube.co.nz
SP610
April 2019
NZ
TEL: (09) 447 1007
FAX: (09) 447 1008
1