Bosch HBF534E 0Q Series Podręcznik użytkownika i instrukcje instalacji - Strona 14
Przeglądaj online lub pobierz pdf Podręcznik użytkownika i instrukcje instalacji dla Piekarnik Bosch HBF534E 0Q Series. Bosch HBF534E 0Q Series 28 stron.
Również dla Bosch HBF534E 0Q Series: Podręcznik użytkownika i instrukcje instalacji (40 strony), Instrukcja obsługi (36 strony)
Drukuj stronę
en Rails
This prevents stubborn stains.
Remove any objects from the cooking compartment.
4.
The cooking compartment must be empty.
Use the function selector to set 3D hot air.
5.
6.
Use the temperature selector to set the maximum
temperature.
a The appliance starts heating after a few seconds.
Switch off the appliance after 1 hour.
7.
Once the appliance has cooled down sufficiently,
8.
wipe the cooking compartment with a damp cloth.
Note: Reddish marks may appear on the self-clean-
ing surfaces. This is not rust, but the residues of
salty food. Nutrients such as sugars and proteins
are not removed from the surface coating and may
Rails
11 Rails
To clean the rails and cooking compartment thor-
oughly, you can remove the shelf supports.
11.1 Unhooking the rails
WARNING ‒ Risk of burns!
The rails can be very hot.
Never touch the rails when they are hot.
▶
Allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
Lift the front rail upwards and unhook it.
1.
2.
Then push the entire rail to the front and remove it.
14
stick to the surface. These spots are not harmful
and do not impair the cleaning ability of the self-
cleaning surfaces.
Attach the shelf supports.
9.
→ "Rails", Page 14
10.4 Cleaning the stainless steel surfaces
Observe the information regarding the cleaning
1.
agents.
Clean using a sponge cloth and hot soapy water in
2.
the direction of the finish.
Dry with a soft cloth.
3.
Apply a thin layer of the stainless steel cleaning
4.
product with a soft cloth.
Tip: You can obtain stainless steel cleaning products
from after-sales service or the online shop.
11.2 Attaching the rails
First insert the rail into the rear socket, press it to
1.
the back slightly
and insert it into the socket at the front.
2.
The rails fit both on the left and right sides. Shelf po-
sitions 1 and 2 are located at the bottom and shelf
positions 3, 4 and 5 are located at the top. Pull out
the telescopic rail towards the front.