AirStage UTY-DCGY Instrukcja instalacji - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kontroler AirStage UTY-DCGY. AirStage UTY-DCGY 9 stron. Central remote controller
Również dla AirStage UTY-DCGY: Instrukcja instalacji (11 strony)

Drukuj stronę
DIP Switch
No.
OFF
1
 Disabled
Enabled
2
3
6. 4.

Installation Method - Integrated type

6. 4. 1
Integrated type
(1)
Pass power supply
cable through Hole-A, and connect it to the
power supply terminal of the power supply unit PC board.
(2)
Fix with the
cable tie.
Power supply cable
Cable tie (accessory)
(3)
Open the knockouts (2 places), and install the one touch bush (2
pcs, accessories).
(4)
Connect the connector of
relay connector of the cable coming from the power supply unit
PC board.
One touch bush (accessories)
knockout
Hole-B
Connection cable
(accessory)
knockout
Hole-C
One touch bush
(accessories)
(5)
Pass
Connection cable (accessory) through Hole-C and Hole-D,
and connect it to rear panel terminal.
En-5
Details
ON
For enabling/disabling the backup
function.
-
Not used. Fixed to "OFF".
-
Not used. Fixed to "OFF".
(  :Factory setting)
Hole-A
POWER SUPPLY
L N
Power supply terminal
Connection cable (accessory) to the
Hole-A
Relay connector
(6)
Pass transmission cable through Hole-B, Hole-C, and Hole-D,
and connect it to rear panel terminal. Fix with the cable tie (ac-
cessory).
Transmission cable
Hole-B
Cable tie
(accessory)
Connection cable
(accessory)
Hole-C
Hole-D
(7)
Fix with the
cable tie (accessory).
Cable tie
(accessory)
Connection cable
Transmission cable
Rear panel terminal
Take care so that the earth (ground) cable does
not get into touch with other cables and parts.
(8)
Install the power supply unit to a wall. Then install the power sup-
ply unit cover and rear panel. Be careful not to pinch the cable.
Screw ×4
(9)
Connect the connection cable connector to the connector (CN13)
of the front panel PC board.
Hole-A
+5V
GND
X1
X2
Screw ×6
(accessories)