Bosch HBG38U7 0 Series Instrukcja obsługi - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Piekarnik Bosch HBG38U7 0 Series. Bosch HBG38U7 0 Series 40 stron.

Drukuj stronę

Basic setting

Restore factory settings:

Changing the basic settings

Prerequisite: The oven must be switched off.

Example: Changing the acoustic signal duration basic setting

from medium to short.

Press and hold the

button for approx. 4 seconds until the

"Basic settings" heading and the first basic setting "Select

language: English" appears.

Turn the

button to select the required basic setting.

Automatic switch-off

Your oven has an automatic switch-off function. It is activated if

no cooking time is set and the settings have not been changed

for a long time. The point at which this occurs depends on the

temperature or grill setting that has been set.

Switch-off activated

"Automatic switch-off" appears in the display. Operation is

Cleaning system

The cleaning system regenerates the self-cleaning surfaces in

the cooking compartment.

The self-cleaning surfaces are coated with a highly porous

ceramic layer. This coating absorbs and disintegrates splashes

from baking and roasting while the oven is in operation. If the

surfaces no longer clean sufficiently and dark stains appear,

they can be regenerated with the cleaning system.

Retrofitting the self-cleaning ceiling and side walls

The back wall in the cooking compartment is coated with

ceramic. In order for you to be able to use the cleaning system,

the ceiling and side walls must also be coated. You can obtain

the self-cleaning ceiling and side walls as a special accessory

from the after-sales service.

Changing the basic settings

When you have retrofitted the self-cleaning ceiling and side

walls, you must activate the cleaning system in the basic

settings. To find out how to do this, refer to the Basic settings

section.

Cleaning levels

You can choose from three cleaning levels.

Level

Degree of cleaning

gentle

moderate

intensive

Options

Yes

Duration

approx. 45 minutes

approx. 1 hour

approx. 1 hour, 15 minutes

Explanation

Undo all changes and restore basic settings.

You can change the basic setting by turning the rotary

selector.

You can now make further changes to the basic settings To

do so, use the

setting. Change the basic setting by turning the rotary

selector.

Press and hold the

button until the clock appears. This

takes about four seconds. All changes are saved.

Cancelling

Press the

button. The changes are not applied.

interrupted. Press any button to clear the text. You can make

new settings.

Note: If a cooking time is set, the oven stops heating once the

cooking time has elapsed. The automatic switch-off function is

not necessary.

Before cleaning

Remove accessories and cookware from the cooking

compartment.

Cleaning the cooking compartment floor

Before you set the cleaning system, clean the surfaces in the

cooking compartment that are not self-cleaning. Otherwise,

stains will develop that it is not possible to remove.

Use a dish cloth and hot soapy water or a vinegar solution. If

there are heavy deposits of dirt, use a stainless steel scouring

pad or oven cleaner. Only use when the cooking compartment

is cold. Never treat the self-cleaning surfaces with a scouring

pad or oven cleaner.

Setting the cleaning level

Press the

button.

Cleaning level 3 is suggested. You can start the cleaning

operation immediately.

If you wish to change the cleaning level:

Select the desired cleaning level using the rotary selector.

Press the

button to start the cleaning operation.

You can see the cooking time counting down in the status bar.

Once cleaning has finished

00:00:00 is displayed in the status bar. The oven is no longer

heating.

Cancelling cleaning

Press and hold the

button until 3D hot air, 160 °C appears.

You can make new settings.

Adjusting the cleaning level

Once cleaning starts, the cleaning level can no longer be

changed.

button to switch to the desired