BDH Elkay 376A-1 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Timer BDH Elkay 376A-1. BDH Elkay 376A-1 4 stron. Illuminated pir timer

Drukuj stronę

Installation Notes

In case of a power failure, your Elkay PIR

timer will attempt to automatically

re-start, which will cause the blue locator

ring to fl ash. The unit will attempt to

locate the power source. The unit will

attempt to locate the power source

between 4-6 times before powering

down to sleep mode.

Once power is re-installed to reactivate

the unit switch battery OFF for 15 seconds

then back ON and leave unit to

re-initialize itself.

Override

Your Elkay timer has the added benefi t of a

manual override facility. This allows the

lights to be turned on for the set period of

time when the ambient level is such that

the lights would not usually come on.

In dark conditions the manual override

disables the PIR allowing the lights to be

turned off indefi nitely or when the

override switch is re-pressed.

Important Notice

All wiring should be carried out by a

competent person or a qualified electrician

and should be fitted to current IEE wiring

regulations BS 7671.The circuit should

be isolated before carrying out any work.

Failure to adhere to the instructions will

invalidate the warranty.

Brook House,

Dunmurry Industrial Estate,

Dunmurry,

Belfast BT17 9HU

T +44 (0)28 9061 6505

F +44 (0)28 9061 6518

E info @ elkay.co.uk

Picture 5

Activator and Momentary Fitting

When connecting with Activators use three

core cable connecting the Live In, Live Out

and Trigger terminals as shown in diagram 2.

The optional wire to the Activators only

applies to the 350A-1 Pushbutton Activator

units and is ideal for retrofi tting

(See diagram 2).

Please note that the Trigger terminal is the

third terminal. Momentary or activating

switches can also be used and can be

connected back to the Live In and the

Trigger terminal on the master.

Technical Helpline

For further help or assistance or information on this or other products in the range

please call the Elkay Technical team on +44 (0)28 9061 6505. Please call the Technical

helpline before returning any products to your stockist. In the unlikely event that you

have to return your product, please ensure you switch the battery oﬀ ﬁ rst. These

instructions are available in other languages. Please refer to our website www.elkay.co.uk

Instrukcje są również dostępne w innych językach. Prosimy o zapoznanie się z

naszą stroną internetową www.elkay.co.uk lub www.elkaypolska.pl

elkay.co.uk

Elkay (Europe), 51C Milicka, Trzebnica, 55-100, Poland

BROOK DE

BDH

BROOK DESIGN

HARDWARE LTD