1PBROADBAND technicolor DGA4231 Podręcznik szybkiej konfiguracji - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Router sieciowy 1PBROADBAND technicolor DGA4231. 1PBROADBAND technicolor DGA4231 8 stron.
Drukuj stronę
Wi‑Fi settings label
On the back panel of your DGA4231 you can find a label with useful
information about the Wi‑Fi access point:
• The Network Name.
This name is used to identify the access point. Some use the term SSID instead.
• The Wireless Key.
This key is used to secure the Wi‑Fi network. Only devices that use this key
can connect to the access point. You can enter this key manually or configure it
automatically using WPS.
Tips
To achieve optimal link quality:
• Always try to reduce the number of obstacles (especially walls) between your
Wi‑Fi devices to a minimum.
• Do not place your Wi‑Fi devices in the neighbourhood of devices that cause
interference (microwave ovens, cordless phones, baby monitors, etc.).
Connecting a Wi‑Fi device using WPS Push Button Configuration
(PBC)
1 Make sure that your Wi‑Fi devices supports WPS PBC and you know how to start
it. For more information, consult the documentation of your Wi‑Fi device.
2 On the top panel of your DGA4231, briefly press the WPS ( ) button and then
release it. The WPS ( ) LED starts blinking orange.
3 Within two minutes, start WPS PBC on your Wi‑Fi device. You will probably have
to do this in one of the following ways:
Press a WPS ( ) button on your Wi‑Fi device.
Start WPS (PBC) on the user interface of your Wi‑Fi device.
Open a list of available networks and select the Network Name mentioned on
Wi‑Fi settings label.
4 After a few seconds, your Wi‑Fi device should be connected.
If the WPS (
not connect your Wi‑Fi device. For more information, see
LED is blinking red" on
Connecting a Wi‑Fi device manually
On your Wi‑Fi device, proceed as follows:
1 Open the list of available Wi‑Fi networks and select the entry that contains the
Network Name from the label.
2 Your Wi‑Fi device will ask you to enter the Wi‑Fi key or password.
) LED starts blinking red, then your DGA4231 could
page 6.
5
"The WPS