ADVANCED FLOORTECH AF-X1 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Scrubber ADVANCED FLOORTECH AF-X1. ADVANCED FLOORTECH AF-X1 13 stron. Floor scrubber

AF-X1

● Batteries of different specifications and brands have matching chargers. Using a

charger that does not match may damage the battery or even cause the battery to burst.

Be sure to pay great attention to it! The maintenance of the machine must be carried out

by professionals in the special maintenance department. If the machine is repaired and

disassembled without authorization, personal injury and damage to the machine may

occur. This machine has been systematically debugged before leaving the factory. After

maintenance and disassembly, make sure that all fasteners are not loose, and the

adjustment parts are adjusted and locked as required.

●The electrical components of the machine may be short-circuited when exposed to

water or in a humid environment. Make sure the electrical components are dry, wipe the

machine clean after use and park in a dry environment.

●The charging area should be ventilated. Please use the E-core power cord and power

supply with grounding wire for the charger. To prevent electric shock accidents to the

greatest extent, please install a leakage circuit breaker.

●It is strictly forbidden to place any objects on the battery.

●When cleaning the machine, please do not pour water into the air inlet of the suction

motor!

● Failure to pay attention to the label on the machine and the contents of the instruction

manual will result in injury. Be sure to read all labels on the machine before operating.

●The machine cannot be used on rough ground and slopes, and the operator cannot sit

on the machine to avoid contact with the rotating parts of the machine with hands, feet

and loose clothes.

●Be careful and slow when the machine is operating on the side, pay attention to the

space between the anti-collision wheel and the wall, and avoid the machine from moving

from small obstacles, such as ground power sockets, thresholds, ground line feet, etc.

●Using water or cleaning agent will wet the ground, and these places are easy for the

operator or others to slip, so please place a warning mark around it during operation.