Draytek VigorAP 802 Skrócona instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Bezprzewodowy punkt dostępowy Draytek VigorAP 802. Draytek VigorAP 802 9 stron. 802.11ac dual-band wall plug ap
Również dla Draytek VigorAP 802: Skrócona instrukcja obsługi (11 strony)
Drukuj stronę
There are two methods to configure VigorAP.
Method 1:
(a) First, open a web browser on your PC and type https://192.168.1.2. A
pop-up window will open to ask for username and password.
Note
(b) After clicking Login, Quick Start Wizard for configuring wireless
settings will appear as follows.
(c) Follow the on-screen steps to finish the network connection.
You may either simply set up your computer to get IP dynamically from the
router or set up the IP address of the computer to be in the same subnet as the IP
address of VigorAP 802.
If there is no DHCP server on the network, then VigorAP 802 will have an
IP address of 192.168.1.2.
If there is DHCP available on the network, then VigorAP 802 will receive its
IP address via the DHCP server.
If you connect to VigorAP by wireless LAN, you could try to access the web
user interface through http://vigorap.com.