Draytek VigorAP 910C Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Bezprzewodowy punkt dostępowy Draytek VigorAP 910C. Draytek VigorAP 910C 16 stron. 802.11ac ceiling-mount access point
Również dla Draytek VigorAP 910C: Skrócona instrukcja obsługi (19 strony), Skrócona instrukcja obsługi (18 strony)
Drukuj stronę
Descriptions of Components
LED
Blue LED
Purple LED
Orange LED
Off
Interface
Ethernet Port
Power Jack (DC IN)
Hole
Factory Reset
Status
Explanation
Blinking
VigorAP is ready and can work normally.
Off
VigorAP is not ready or fails.
On
Power adapter is plugged in and VigorAP is
initiating.
Blinking
The firmware upgrade is in process.
Off
VigorAP is powered off.
Explanation
Connecter for xDSL / Cable modem (Giga level)
or router.
Connecter for a power adapter.
Explanation
Restore the default settings when any error occurs
in VigorAP. Usage: Use sharp article (e.g.,
paperclip or pin) to insert into the hole and keep
for more than 10 seconds. Then VigorAP will
restart with the factory default configuration.
When purple LED is On again, it means VigorAP
has restarted and is ready to use.
LED
Factory
Reset