BDS 9069 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt testowy BDS 9069. BDS 9069 6 stron. Vacuum & fuel pump tester

Drukuj stronę
BDS 9069 Instrukcja obsługi
Vacuum & Fuel Pump Tester
INTRODUCTION
3.5" Gauge with protective rubber bumper and hanging hook. Checks for leaks in fuel line, vacuum
chokes and heating. Also suitable for diagnosing valve problems. Includes long flexible hose and
adaptors. Supplied in storage case.
IMPORTANT
Read these instructions carefully. Note the safe operational requirements, warnings
and cautions. Use the tool correctly and with care for the purpose for which it is
intended. Failure to do so may cause damage and/or personal injury and will
invalidate the warranty. Please keep instructions safe for future use.

IMPORTANT SAFETY INFORMATION

Observe standard workshop safety procedures when using the test gauge.
•
Wear safety eye protection and protective clothing. Avoid touching eyes while working with petrol.
•
Have fresh water and soap nearby in case petrol contacts skin, clothing or eyes.
•
Remove loose personal items such as rings, bracelets, necklaces, ties and contain long hair.
•
Ensure hands, clothing are clear of fan blades and other moving or hot parts of engine.
•
Keep the work area clean and uncluttered and ensure there is adequate lighting.
•
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
•
Keep children and unauthorized persons away from the working area.
•
Ensure that connections for testing the fuel pump are secure and free from leaks.
•
WARNING! DO NOT use test gauge on any vehicles other than those with carburetor fuel
•
systems.
DO NOT smoke or allow a spark or flame in and around the vehicle.
•
DO NOT dismantle the test gauge. The test gauge must be checked by qualified service
•
personnel only.
DO NOT get tester wet or use in damp or wet locations or areas where there is condensation.
•
DO NOT use the tester for any purpose other than that for which it is designed.
•
DO NOT operate the tester if damaged.
•
When not in use store tester in a safe, dry, childproof location.
•
SW-Stahl und Werkzeugvertriebs GmbH
L
e
v
e
k r
u
s
r e
t S
a r
s
s
e
6
5
D
4 -
2
8
9
7
R
e
m
s
c
h
e
d i
Tel. +49 (0) 2191 / 46438-0
F
ax +49 (0) 2191 / 46438-40
- E
M
a
: l i
n i
o f
@
s
w
s
a t
l h
d .
e
Art. 9069