Alen BreatheSmart FLEX Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Oczyszczacz powietrza Alen BreatheSmart FLEX. Alen BreatheSmart FLEX 12 stron. Hepa air purifier
Drukuj stronę
KNOW YOUR AIR PURIFIER
When using the air purifier for the first time in a room, we recommend using a higher fan
speed, such as speed three (3) or Turbo (T), for at least two hours to clean the room's air
initially. Then, we recommend running the air purifier continuously in Auto mode or on speeds
two (2) or three (3).
Features
•
True HEPA filtration captures dust, allergens and airborne pollutants
•
4 fan speeds with a 2, 4, & 12-hour timer to control air circulation
•
Filter change indicator light keeps replacements on schedule
•
Simple and intuitive touch controls
•
Auto-off safety feature when front cover is removed
•
Filter designed for easy replacement
CARE & MAINTENANCE
Turn The Lights Off/On
To turn the lights off on your unit, press the
will not turn off. Press any button to turn the lights back on, or press the
time to turn the unit off completely.
Replacing The Filter
The Filter Indicator has 3 lights: Green, Yellow, and Red. The Green light will be illuminated for
most of the life of the filter. Yellow light will come on shortly before your filter should be replaced.
This is the ideal time to order a new filter. You may order a new filter at www.alen.com/filters or
by calling 1-800-630-2396. The Red light will illuminate when it is time to replace the filter.
The filters used in Alen Air Purifiers are not designed to be washed, cleaned, or otherwise
reused. Over time, the filters become overloaded with particles, decreasing their filtration
performance. We recommend regular filter replacements to extend the life of your air purifier
and maximize performance.
The black mesh layer of the filter, known as the prefilter, captures large dust and hair.
This layer is held on with Velcro
to maintain efficient operation of the unit.
Reset the Filter Indicator
After replacing the filter, hold the FILTER button down for 5 seconds.
The Red light will be reset to Green.
Power Button. The lights will go out but the unit
-like strips. Once removed, the prefilter can be vacuumed
®
www.alen.com 1-800-630-2396
Power Button a 2nd
6