Drazice OKHE 160 Instrukcja obsługi i instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Podgrzewacz wody Drazice OKHE 160. Drazice OKHE 160 9 stron. Tank-type water heaters for vertical mounting
Również dla Drazice OKHE 160: Instrukcja obsługi i instalacji (19 strony)
Drukuj stronę
Read carefully the below instructions prior to the installation of the heater!
Dear Customer,
The Works Cooperative of Dražice - Machine Plant, Ltd., would like to thank you for your decision to use a product
of our brand.
With this guide, we will introduce you to the use, construction, maintenance and other information on indirect water
heaters.
Product's reliability and safety is proven by tests implemented by the Engineering Test Institute in Brno.
The manufacturer reserves the right for engineering modification of the product.
The product is designed for permanent contact with drinkable water.
Guide Contents
1.
Function description: ................................................................................................................................. 2
1.1
Hot water consumption ...................................................................................................................... 2
1.2
Energy saving..................................................................................................................................... 3
1.3
Emergency power consumption ......................................................................................................... 3
2.
Servicing .................................................................................................................................................... 3
2.1
The service devices of the heater are located under the plastic guard of the control panel. .............. 3
2.2
Temperature setting ........................................................................................................................... 3
2.3
Limiting the regulation range; locked settings. .................................................................................. 3
3.
Structure of the heater ................................................................................................................................ 4
4.
Operating conditions .................................................................................................................................. 4
4.1
General ............................................................................................................................................... 4
5.
Wall mounting ........................................................................................................................................... 5
5.1
Connection to power water ................................................................................................................ 5
6.
First putting into operation........................................................................................................................ 7
6.1
Putting out of service, discharge ........................................................................................................ 7
7.
Inspection, maintenance & care for the appliance ..................................................................................... 7
8.
Most frequent function failures and their causes ....................................................................................... 8
9.
Installation regulations ............................................................................................................................... 8
Environment Type:
It is recommended to use the product in indoor environment with air temperatures from +2°C to 45°C and a
relative humidity up to 80%.
1.
Function description:
The heater is designed for accumulation heating of service water using electricity. Water is heated by an electric
element in an enamelled thermally insulated tank at the time defined by the power supplier. The element is at the time
of heating controlled by a thermostat the temperature of which can be adjusted continuously (within the range between
5°C and 74°C). Once the selected temperature is reached, heating interrupts automatically. Water accumulated in the
tank is then used for consumption.
1.1
Hot water consumption
Consumption of hot water in households depends on the number of people, amount of sanitary equipment, length,
diameter and insulation of piping in the flat, or on individual habits of users. The cheapest option of water heating
comes at the time when the electricity rate is reduced. Find out in what time intervals your electricity supplier
provides reduced tariff and, depending on that information, select relevant volume and power input of the heater so
that your hot water consumption covered the needs of your household.
e-mail:[email protected]
2