Drazice OKC 160 NTR / BP Instrukcja obsługi i instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Kocioł Drazice OKC 160 NTR / BP. Drazice OKC 160 NTR / BP 20 stron. Stationary water heaters
Również dla Drazice OKC 160 NTR / BP: Instrukcja obsługi i instalacji (17 strony), Instrukcja obsługi i instalacji (12 strony), Instrukcja obsługi i instalacji (20 strony), Instrukcja obsługi i instalacji (20 strony), Instrukcja obsługi i instalacji (18 strony), Instrukcja obsługi i instalacji (18 strony), Instrukcja obsługi i instalacji (13 strony)

1 PRODUCT TECHNICAL SPECIFICATION

The heater is designed for the so-called accumulation heating of service water by electric energy, or by

thermal energy through exchanger. Water is heated by an electric element or heat exchanger in an

enamelled thermally insulated tank at the time specified by the electricity supplier. At the time of the

heating, the element is controlled by thermostat on which the desired temperature can be set (ranging

from 5 and 74℃). Once the selected temperature is reached, heating interrupts automatically. Water

accumulated in the tank is then used for consumption. The tank keeps constant pressure of water from the

water main. If the combination faucet hot water valve is opened, water from the water supply conduit

pressed out by cold water pressure flows out of the heater. Hot water flows out through the top part, and

water flowing in remains in the bottom part of the heater. Pressure principle allows hot water withdrawal

at any place from the heater (Fig. 6).

Consumption of hot water in households depends on the number of people, amount of

sanitary equipment, length, diameter and insulation of piping in the flat, or on individual

habits of users. The cheapest option of water heating comes at the time when the

electricity rate is reduced.

Find out in what time intervals your electricity supplier provides reduced tariff and,

depending on that information, select relevant volume and power input of the heater so that

your hot water consumption covered the needs of your household.

Hot utility water reservoir is insulated by means of top-quality polyurethane foam with zero

CFCs content. Adjust the temperature of the heater's thermostat to that level only that you

need to run your home. Thus you will reduce electricity consumption, as well as the amount

of lime sediments on the walls of the receptacle and on the heat exchanger.

- 4 -