Drazice OKC 200 NTRR / BP Instrukcja obsługi i instalacji - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja obsługi i instalacji dla Kocioł Drazice OKC 200 NTRR / BP. Drazice OKC 200 NTRR / BP 18 stron. Stationary water heaters
Również dla Drazice OKC 200 NTRR / BP: Instrukcja obsługi i instalacji (17 strony), Instrukcja obsługi i instalacji (12 strony), Instrukcja obsługi i instalacji (19 strony), Instrukcja obsługi i instalacji (20 strony), Instrukcja obsługi i instalacji (20 strony), Instrukcja obsługi i instalacji (20 strony), Instrukcja obsługi i instalacji (18 strony), Instrukcja obsługi i instalacji (13 strony)

4 IMPORTANT NOTICES

Without a confirmation of performed electrical installation issued by an authorised company, the

warranty certificate shall be void.

Check and exchange the Mg anode regularly.

You have to apply for approval of a local power supplier to connect the appliance.

No stop valves can be put between the appliance and the safety valve.

If the overpressure in the water main exceeds 0.48 MPa, a pressure control valve must be mounted

before the safety valve.

All hot water outputs must have a combination faucet.

Before filling the appliance with water for the first time, it is recommended to fasten the flange

connection nuts of the appliance.

It is not allowed to handle the thermostat, aside from temperature resetting with a control button.

All electric installation handling, adjustment and replacement of the regulation elements shall only

be performed by an authorised service company.

The thermal fuse must not be turned off! In case of thermostat defect, the thermal fuse interrupts

electric power input to the heating element if the water temperature in the appliance exceeds 90

°C.

As an exception, the thermal fuse may also switch off due to water overheating caused by

overheating the hot water heating system boiler.

We recommend you operate the appliance with one type of energy.

Both the electric and water installation must follow and meet the requirements and

regulations relevant in the country of use!

4.2 DISPOSAL OF PACKAGING MATERIAL AND NON-

FUNCTIONING APPLIANCE

A service fee for providing return and recovery of packaging material has

been paid for the packaging in which the water appliance was delivered. The

service fee was paid pursuant to Act No 477/2001 Coll., as amended, at EKO-

KOM a.s. The client number of the company is F06020274. Take the water

boiler packages to a waste disposal place determined by the town. When the

operation terminates, disassemble and transport the discarded and

unserviceable appliance to a waste recycling centre (collecting yard), or

contact the manufacturer.

- 17 -