Alen PORTABLE AIR CONDITIONER Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Klimatyzator Alen PORTABLE AIR CONDITIONER. Alen PORTABLE AIR CONDITIONER 13 stron.
Drukuj stronęA) TEMPORARY-
1. Attach one end of the duct to the exhaust air outlet of the
mobile air condition, push it as depicted in Fig.9, be sure
to fix thoroughly. (See Fig.10)
2. Attach the other end of the duct to adaptor B.
3. Put the end of duct to a nearby window.
B) PERMANENT-
1. Attach one end of the duct to the exhaust air outlet of the
mobile air conditioner. Push it according to the arrow
direction, be sure to fix thoroughly. (See Fig.9)
2. Install the adaptor A onto the wall by using 4 expansion
plugs and screws, be sure to fix thoroughly. (See Fig.11)
3. Attach the other end of the duct to adaptor A.
4. Cover the hole using the adaptor cap when not in use.
The duct can be compressed or extended between 500mm
and 2000mm, but it is desirable to keep the duct length to a
minimum.
IMPORTANT:
DO NOT OVER BEND THE DUCT (SEE Fig.12)
4. WATER TANK SAFETY FEATURE
This unit is equipped with a water tank which has fastened
with a band in the factory to protect the water lever switch
during transportation. For the first time to use the unit,
please drag the water tank out and remove the fasten
band (see Fig.13) and then replace the water tank to its
original position gently. Never push or kick it rudely,
otherwise the following malfunction may occur.
When the water level reaches a predetermined level, the
digital display area shows P1 and the water full indicator
light will flash(red). Carefully remove the water tank from
the cabinet and dispose of the water (See Fig.14). Replace
the water tank back to its original position. The red light will
stop flashing and P1 symbol will disappear. The unit will
continue operating properly.
Note: When drag the water tank out from the cabinet, please
do it slowly and gently to prevent water splashing.
Any time when the water tank is removed/displaced,
and /or full of water, the water full indicator will flash red
and the digital display area show P1 .
Expansion plug
position
Adaptor A
Adaptor
cap
Fig.11
Fig.12
Fig.13
Fig.14
max 120CM
min 30CM
Band
9