Bosch Series 4 Instrukcja obsługi - Strona 22

Drukuj stronę

Trouble shooting

3Trouble shooting

I f a fault occurs, there is often a simple explanation.

T r o u b l e s h o o t i n g

Before calling the after-sales service, please refer to the

fault table and attempt to correct the fault yourself.

Rectifying faults yourself

You can often easily rectify technical faults with the

appliance yourself.

If a dish does not turn out exactly as you wanted, you

can find useful cooking tips and instructions at the end

of this instruction manual. ~ "Tested for you in our

cooking studio" on page 23

Fault

Possible

cause

The appliance is

Defective cir-

not working.

cuit breaker.

Power failure Check whether the kitchen light

The time is flash-

Power failure. Reset the time.

ing on the display.

The settings on

The child-

the appliance

proof lock is

cannot be config-

activated.

ured. A key sym-

bol has lit up on

the display or

†'""

--------

Warning – Risk of injury!

Incorrect repairs are dangerous. Do not attempt to

repair the appliance yourself. Repairs must only be

carried out by one of our trained after-sales engineers. If

the appliance is defective, call the after-sales service.

Warning – Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be

carried out and damaged power cables replaced by

one of our trained after-sales technicians. If the

appliance is defective, unplug the appliance from the

mains or switch off the circuit breaker in the fuse box.

Contact the after-sales service.

Error messages on the display

If an error message with "

e.g.

, touch the

"‹†

„ƒ

error message. Reset the time, if necessary.

If the fault was a one-off, you can continue to use your

appliance as normal. If the error message appears

again, call our after-sales service and quote the exact

error message and the E no. of your appliance.

~ "Customer service" on page 23

Notes/remedy

Check the circuit breaker in the

fuse box.

or other kitchen appliances are

working.

Deactivate the childproof lock by

pressing and holding the button

with the key symbol for approx. 4

seconds.

" appears on the display,

button. This will reset the

Replacing the bulb in the top of the cooking

compartment

If the cooking compartment light bulb fails, it must be

replaced. Heat-resistant, 25 watt, 230 V halogen bulbs

are available from the after-sales service or specialist

retailers.

When handling the halogen bulb, use a dry cloth. This

will increase the service life of the bulb. Only use these

bulbs.

Warning – Risk of electric shock!

When replacing the cooking compartment bulb, the

bulb socket contacts are live. Before replacing the bulb,

unplug the appliance from the mains or switch off the

circuit breaker in the fuse box.

Warning – Risk of burns!

The appliance becomes very hot. Never touch the

interior surfaces of the cooking compartment or the

heating elements. Always allow the appliance to cool

down. Keep children at a safe distance.

Place a tea towel in the cold cooking compartment

to prevent damage.

Turn the glass cover anti-clockwise to remove it

(figure

Pull out the bulb – do not turn it (figure

Insert the new bulb, making sure that the pins are in

the correct position. Push the bulb in firmly.

Screw the glass cover back on.

Depending on the appliance model, the glass cover

may have a sealing ring. If the glass cover has a

sealing ring, put it back in place before screwing the

cover back on.

Remove the tea towel and switch on the circuit

breaker.