Anchor AN-130+ Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Głośniki Anchor AN-130+. Anchor AN-130+ 14 stron.
Również dla Anchor AN-130+: Instrukcja obsługi (7 strony), Instrukcja obsługi (6 strony), Instrukcja obsługi (14 strony)

Drukuj stronę

HAVING TROUBLE WITH YOUR SOUND SYSTEM?

CONDITION POSSIBLE SOLUTIONS

• Turn POWER knob clockwise to turn ON

No Sound (Power LED: OFF)

• Check battery level, charge battery, or plug in AC cord

• Check your source audio and turn up volume of source audio

No Sound (Power LED: ON)

• Make sure all cables are completely plugged in

• Turn up volume control

• Check battery level of microphone

Wireless Mic will not Connect to System

• Un-pair all microphones from the system then re-pair the microphones

• Check the Mute button on the microphone or belt pack

Connected Wireless Mic but No Sound

• Raise volume on the microphone and system

(Solid Green LED)

• Check battery level of microphone and system

• Re-position system away from any possible interference sources

Poor Wireless Range /

Poor Wireless Audio Quality

• Minimize obstructions between the system and wireless microphone

• If wireless range continues to be poor, call Anchor Audio Tech Support

• Check battery level, charge battery, or plug in AC cord

• Lower system volume

Distorted Sound

• Lower source audio volume

• Wireless belt pack - ensure Mic and/or Line Level setting is correct

• Lower the volume on the microphone (handheld or belt pack)

Excessive Feedback (Squelching)

• Do not stand within at least 10 feet in front of the speaker with the mic(s)

• Use shielded cables

Excessive Hum or Noise

• Use a balanced microphone