Bosch 1773AK Instrukcja obsługi/bezpieczeństwa - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi/bezpieczeństwa dla Elektronarzędzie Bosch 1773AK. Bosch 1773AK 33 stron. Concrete surfacer
Również dla Bosch 1773AK: Broszura (34 strony)
Drukuj stronę
BM 3609929777 1/02
1/3/02
REMOVING AND INSTALLING
GRINDING WHEELS
1. Depress the spindle lock button to
prevent the wheel form rotating.
2. Loosen the lock nut with the wrench
provided, and remove lock nut and dry
diamond cup wheel (fig. 2).
FIG. 2
DRY
DIAMOND
CUP WHEEL
LOCK NUT
WRENCH
REPLACING BRUSH INSERT
1. With the dry diamond cup wheel
mounted, locate separation in brush insert.
2. Carefully begin prying and lifting brush
insert where separation begins, with a flat tip
screwdriver and remove brush insert (Fig. 3).
3. Carefully press new brush insert into
recess in guard until it stops on shoulder of
guard.
NOTE: Always be sure that the bristles on
the brush insert are not lying in the recess,
when installing the brush insert.
1:16 PM
Page 7
Assembly
3. Clean backing flange, spindle, lock nut,
and guard with brush insert.
4. Place new dry diamond cup wheel onto
the spindle. Depress spindle lock and thread
lock nut onto spindle, and securely tighten
lock nut with the wrench provided.
WHEEL
GUARD
LOCK NUT
FIG. 3
BRUSH
INSERT
-7-
BACKING
SPINDLE
FLANGE
WHEEL
GUARD