Bosch 2 Skrócona instrukcja obsługi - Strona 5

Drukuj stronę

Electric straight screwdriver with lever start

Rated current

No-load speed

Maximum torque, hard/soft screwdriving application according to ISO 5393

Direction of rotation

Marking ring

Max. screw diameter

Weight according to EPTA-Procedure 01:2014

Protection rating

Noise/Vibration Information

Noise emission values determined according to

EN 62841-2-2.

Typically, the A-weighted sound pressure level of the power

tool is 70 dB(A). Uncertainty K = 3 dB. The noise level when

working can exceed 80 dB(A).

Wear hearing protection

Total vibration values a

(triax vector sum) and uncertainty K

determined according to EN 62841-2-2:

Screwdriving: a

< 2.5 m/s

, K = 1.5 m/s

The vibration level and noise emission value given in these

instructions have been measured in accordance with a

standardised measuring procedure and may be used to com-

pare power tools. They may also be used for a preliminary

estimation of vibration and noise emissions.

The stated vibration level and noise emission value repres-

ent the main applications of the power tool. However, if the

power tool is used for other applications, with different ap-

plication tools or is poorly maintained, the vibration level

and noise emission value may differ. This may significantly

increase the vibration and noise emissions over the total

working period.

To estimate vibration and noise emissions accurately, the

times when the tool is switched off or when it is running but

not actually being used should also be taken into account.

This may significantly reduce vibration and noise emissions

over the total working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping their hands warm,

and organising workflows correctly.

Assembly

Disconnect the power supply before adjusting the tool

settings, changing accessories or storing the power

tool. This safety measure prevents the power tool from

being started accidentally.

Operating and storage conditions

The power tool is suitable only for operation at enclosed

work sites.

Bosch Power Tools

To ensure smooth operation, the permitted ambient temper-

ature should be between -5 °C and +50 °C (23 °F and 122

°F), at a permitted relative humidity of between 20% and

95%, free of condensation.

The electric straight screwdriver should be stored at a tem-

perature of between -20 °C (-4 °F) and 70 °C (158 °F) in or-

der to prevent damage to the electronics.

Suspension device

You can use the hanging hook (8) to attach the power tool to

a suspension device.

Regularly check the condition of the hanging hook and

the catch in the suspension device.

Changing the tool

Inserting the application tool

Pull the quick-change chuck (3) forwards. Insert the applica-

tion tool (1) into the tool holder (2) and release the quick-

change chuck again.

Only use application tools with a matching shank (1/4"

hexagon).

When fitting an application tool, make sure that it is

held securely in the tool holder. If the application tool is

not held securely in the tool holder, it may become loose

and consequently uncontrollable.

Removing the application tool

Pull the quick-change chuck (3) forwards. Take the applica-

tion tool (1) out of the tool holder (2) and release the quick-

change chuck again.

Connecting to the power supply (see figures A–

The power tool is supplied without a power supply unit. The

PUC-EXACT power supply unit is required to connect the

tool to the power supply.

The PUC-EXACT power supply unit must only be used

with the power tools that are intended for it. Using the

PUC-EXACT with other electric tools may damage the unit

and these tools.

English | 17

C-EXACT 6

1.0

rpm

1000

1.0 – 6.0

in lbs

8.9 – 53.1

black

M 5

0.87

lbs

1.4

IP 20

1 609 92A 6L4 | (18.05.2021)

1.0

500

M 5

1.4