Anchor Economy Tent 40 CLASSIC PLUS Instrukcja montażu - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Namiot Anchor Economy Tent 40 CLASSIC PLUS. Anchor Economy Tent 40 CLASSIC PLUS 8 stron. Frame tents

Drukuj stronę
40'
CLASSIC PLUS FRAME TENTS
5.
Begin assembling the two-piece corner rafter
by attaching one of the two 14'4" Double
Tube Corner Rafter to the Corner Fitting.
Next attach the 6-Way Corner Rafter Fitting
to the other end of the 14'4" tube. Attach the
second 14'4" Double Tube Corner Rafter to
the top portion of the 6-Way Corner Rafter
Fitting. The installer on the ladder then
attaches the Crown Fitting to the top end of
the 14'4" tube. Repeat this procedure for the
next corner rafter location.
6.
Attach the 14'4" Upper Corner Supports
and the 10'5½" Corner Rafter Supports to
each location on the corner fittings. Repeat in
opposite corner.
7.
At this point it is recommended that you
attach the Cross Brace Bars with attachable
fittings or the universal fittings already placed
on your rafters prior to connecting the rafters
to the mid leg/rafter fittings.
NOTE: If assembling a 40'x40' frame only
attach your reaming 21'8" rafter in the end
location and the follow steps the above to
complete the assembly of the reaming two
corner rafters with supports.
8.
When assembling an expandable frame you
will work your way down the frame attaching
a 9'4" Top Bar in the ridge to 4-Way
Expansion Top Fitting. You will then attach
the 21'8" Double Tube Truss Rafters to the
Top Expansion Fitting and the Mid-Leg/
Rafter Fittings. The 40' cross cables and
20'x2"cross braces should be attached as
you complete each set of rafters.
After you reach the opposite 20' end of the
frame, repeat steps 3-7. The frame is now
ready for the cover installation.
|
ASSEMBLY INSTRUCTIONS
10' Step Ladder
10' Step Ladder
10' Step Ladder