Anchor Xtreme NL-6000 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Anchor Xtreme NL-6000. Anchor Xtreme NL-6000 8 stron.

Drukuj stronę

System Inspection & Inventory

Check unit carefully for damage which may have occurred during

transit. Each Anchor product is carefully inspected at the factory

and packed in a special carton for safe transport.

Inventory

• Xtreme sound system

NOTE:

• Warranty registration card

All damage

claims must

All damage claims must be made with the freight carrier. Notify the

be made with

freight carrier immediately if you observe any damage to the

the freight

shipping carton or product. Repack the unit in the carton and await

carrier.

inspection by the carrier's claim agent. Notify your dealer of the

pending freight claim.

Returning Systems For Service or Repair

Should your unit require service, contact your dealer or the Anchor

IMPORTANT:

Audio Customer Service Department at (800) 262-4671 to obtain a

Save the

Return Authorization (RA) number. All shipments to Anchor Audio

shipping

must include an RA number and must be shipped prepaid. C.O.D.

carton and

shipments will be refused and returned at your cost.

packing

materials.

They were

Warranty Registration

specially

Please fill out the warranty card and return it with a copy of your

designed to

invoice to Anchor's Customer Service Department. This will

ship your unit

activate your limited six year warranty.

safely.

GETTING STARTED

Wireless Microphone Operation

NOTE:

Both the receiver and microphone must be set to the same channel.

When using a

1. If you are using a body-pack transmitter, insert the plug from

dual wireless

the mic into the jack marked MIC on the transmitter.

unit, make

sure each

2. Turn the transmitter power switch to ON.

microphone is

(The red LED will flash when the mic is turned on.

set to a

If the red LED stays on, the battery is low.)

different

3. Turn the Xtreme power switch to ON.

channel

frequency.

4. The RX indicators will light (one indicator at a time lights)

when the wireless signal is being transmitted and received.

Replacing Transmitter Battery

Handheld Transmitter:

CAUTION:

Harmful

1. Unscrew battery compartment cover on lower end of mic.

feedback may

occur when

2. Install 2 fresh 'AA' alkaline batteries.

walking in

3. Replace the battery cover.

front of a

sound system

or speaker

with a

wireless

microphone.

Always point

mic away

Body-pack Transmitter:

from speakers.

1. Slide open battery cover on front of transmitter box.

2. Install 2 fresh 'AA' alkaline batteries.

3. Close the battery cover.

NOTE:

Transmitter

power switch

must be in the

OFF position

when

changing

batteries

WIRELESS OPERATION

Place batteries into slot

and slide forward