Anchor bigfoot Skrócona instrukcja obsługi
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla System głośników Anchor bigfoot. Anchor bigfoot 2 stron. Line array sound system
Również dla Anchor bigfoot: Instrukcja obsługi (13 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony)
SOUND SYSTEM PLACEMENT
CORRECT SYSTEM PLACEMENT
(having the micrphone too close to front of unit may cause feedback)
HAVING TROUBLE WITH YOUR SOUND SYSTEM?
CONDITION
No Sound (power LED off)
No Sound (power LED on)
Shortened Battery Life
Distorted Sound
Excessive Hum or Noise
HAVING TROUBLE WITH YOUR WIRELESS SYSTEM? (Wireless Models Only)
CONDITION
No Sound (RX Indicator: ON)
No Sound (RX Indicator: OFF)
The Bigfoot Sound System comes with a six year warranty, Anchor Audio Bluetooth comes with a six year
warranty, and all Anchor Audio batteries and wireless come with a two year warranty.
NEED MORE HELP? Bigfoot Sound System Setup & Operation Videos!
Visit Our Website: www.anchoraudio.com
INCORRECT SYSTEM PLACEMENT
POSSIBLE SOLUTION
• turn POWER switch ON
• charge battery or plug in AC cord
• safely shut down if unit overheats, turn volume lower & turn
speaker ON
• check for output from source
• make sure all cables are completely plugged in
• turn up volume control of input used
• remove plug from speaker output if not using external
speaker output
• charge battery fully; if battery life continues to deteriorate,
contact Anchor Audio customer service: 800.262.4671
• lower system volume control
• lower input volume control
• use shielded cables
• use balanced microphone
POSSIBLE SOLUTION
• turn up WIRELESS volume control
• make sure mic is plugged into body pack transmitter
• push mic power button
• turn Beacon POWER switch on
• make sure transmitter power switch is on
• set receiver and transmitter to same channel
• replace battery in transmitter
BIGFOOT LINE ARRAY SOUND SYSTEM
Quick Start Manual
You can view a demonstration video complete with a trouble shooting section
at www.anchoraudio.com.
Please check your new unit carefully for any damage which may have occurred during shipment.
*Please keep the product box(es) that your Anchor Audio product(s) was shipped in, so it is available in the event the
product(s) need to be shipped back to Anchor Audio for any reason.
CONNECTING MULTIPLE SOUND SYSTEMS
BATTERY POWERED SOUND SYSTEMS
Connect speaker cable (EX-50PPS ) from LINE OUT on first powered Bigfoot to LINE IN on second powered
Bigfoot. Set volume level of the second system to maximum, this gives full volume control to the first
or primary PA system.
800.262.4671 • anchoraudio.com
100-0317-000 Rev. B
MADE IN THE USA
SIX YEAR WARRANTY