Anchor AF-1500 Podręcznik szybkiej konfiguracji - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Systemy filtracji wody Anchor AF-1500. Anchor AF-1500 11 stron.

Installing your filter

IMPORTANT

- Follow the assembly instructions before proceeding. It is

recommended that installation of the whole house water filter be

done by a professional plumber since cutting into your home's main

water line is required.

- Be sure to note inlet and outlet markings on both units. See image

below. The filter has 1" NTP fittings.

- Maximum water pressure is 90 PSI. Install a pressure regulator on

water with pressures higher than this.

- Operating temperature is 40° -100° F. Protect from freezing.

- Use PTFE tape for the fittings and do not overtighten.

RECOMMENDATIONS

- Install a three-valve by-pass valve to loop the entire system. This

enables bypassing water for lawn watering and makes servicing

easier. If installed, a shutoff valve after the filtration system should

also be installed to prevent water entering from wrong end into the

system.