Anchor WB-6400 Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System mikrofonowy Anchor WB-6400. Anchor WB-6400 4 stron. 64 channel uhf wireless system
Drukuj stronęA MESSAGE FROM THE OWNER
Thank you for choosing an Anchor Audio portable sound system. Our products incorporate state-of-the-art design and the finest
quality of materials and workmanship. We're proud of our products and appreciate the confidence which you have shown by se-
lecting an Anchor system.
I hope you'll take a few minutes to review this manual. We've incorporated several unique features into our products, and your
knowledge of how to use them will enhance the performance and your enjoyment of the system.
David Jacobs, President
on behalf of all Anchor Employees
GETTING STARTED
Please check your new unit carefully for any damage which may have occurred during shipment. Each Anchor product is carefully
inspected at the factory and packed in specially designed boxes for safe transport.
Notify the freight carrier immediately of any damage to the shipping box or product. Repack the unit in the original box and wait
for inspection by the carrier's claim agent. Notify your dealer of the pending freight claim.
NOTE: All damage claims must be made with freight carrier!
RETURNING SYSTEMS FOR SERVICE OR REPAIR
For service or repair, please contact the dealer you purchased your system from or Anchor Audio Customer Service at (888) 444-6077
to obtain a RA (Return Authorization) number. All shipments to Anchor Audio must include an RA number and must be shipped
prepaid. C.O.D. shipments will be refused and returned at your expense.
IMPORTANT: Save the shipping box & packing materials,
they were specially designed to ship your unit!
WARRANTY REGISTRATION
Visit our website at www.anchoraudio.com and select "Warranty Registration". Complete the online form to activate the six-year
limited warranty on your Liberty sound system and two-year limited warranty for the CD player and microphones.
ANCHOR WIRELESS 64 CHANNEL UHF SYSTEMS & ACCESSORIES
UHF-6400US/HH
64 CHANNEL RECEIVER & HANDHELD MICROPHONE/TRANSMITTER
UHF-6400US/BP
64 CHANNEL RECEIVER & BODY-PACK TRANSMITTER W/ HANDS FREE MICROPHONE
WIRELESS ACCESSORIES
WH-6400
64 channel wireless handheld microphone/transmitter
WB-6400
64 channel wireless body-pack transmitter for hands free microphone
(microphone not included - see below)
CM-60
Lightweight, low-profile collar microphone - works w/ the WB-6400 transmitter
EM-60T
UltraLite "Over-the-Ear" hands free microphone - works w/ the WB-6400 transmitter
HBM-60
Ultra-lightweight headband microphone - works w/ the WB-6400 transmitter
LM-60
Lightweight, clip-on lapel microphone - works w/ the WB-6400 transmitter
2
OPERATING THE WIRELESS MICROPHONE / TRANSMITTER
CHANNEL SELECTION - HANDHELD TRANSMITTER
1. Unscrew battery cover on bottom of microphone
2. Set the CHANNEL & GROUP SELECTOR dials to
match the setting of your receiver
3. Replace battery cover and tighten firmly
NOTE: When using dual wireless, each microphone must be set to a different channel!
USING YOUR WIRELESS MICROPHONES
After you have set the transmitter channel (see above) you are ready to use your wireless microphone:
1. Body-pack transmitter users must insert the mic
plug into the transmitter jack marked MIC
2. Turn the transmitter power switch to ON
(The red LED will flash when the mic is turned on.
If the red LED stays on, the battery is low)
CAUTION: Harmful feedback may occur when walking in front of a sound system or
speaker with a wireless microphone. Always point microphone away from speakers!
REPLACE BATTERY - HANDHELD TRANSMITTER
1. Unscrew battery cover on bottom of microphone
2. Replace old batteries with 2 fresh size 'AA'
alkaline batteries
3. Replace battery cover and tighten firmly
NOTE: Transmitter power must be OFF when changing batteries!
CHANNEL SELECTION - BODY-PACK TRANSMITTER
1. The selection dials are located on the
side of the transmitter
2. Set the CHANNEL & GROUP SELECTOR dials to
match the setting of your receiver
3. Turn the receiver power switch to ON
4. The RX & AF indicators will light when the wireless
signal is being transmitted and received
REPLACE BATTERY - BODY-PACK TRANSMITTER
1. Slide open battery cover on front of transmitter
2. Replace old batteries with 2 fresh size 'AA'
alkaline batteries
3. Replace battery cover by sliding firmly into place
7