Formax AutoSeal FD 1500 Plus Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Maszyny składające Formax AutoSeal FD 1500 Plus. Formax AutoSeal FD 1500 Plus 14 stron.
Drukuj stronę
UNPACKING AND SET UP
1. Check package for shipping damage. If there is shipping damage, do not discard the box.
2. CAUTION: Two people must lift machine out of the box.
3. To attach the conveyor to the out-feed, align the tab on the right side of the conveyor with the slot
on the machine (Figure 1a). Rest it upon the two alignment studs (see arrows), and tighten the four
thumbscrews provided (Figure 1b).
4. Plug cord into machine and into wall outlet.
Figure 1a
CONTROL PANEL
Start
Stop
Ready light
Counter Reset
Counter
Figure 1b
Starts machine.
Stops machine.
Steady green when power is on.
Blinks red when cover is open or fault is detected.
Resets counter
Shows forms count
2