Formax CT-20 Instrukcja montażu, obsługi i części - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja montażu, obsługi i części dla Sprzęt biurowy Formax CT-20. Formax CT-20 12 stron. Conveyor stacker

Drukuj stronę
ASSEMBLY
1.
Mount the conveyor to the stand. Turn the
conveyor up on the non-operator side and
remove the four center screws from the bottom
plate of the conveyor. Place the conveyor
ontop of the stand and align the holes. Use
the removed button head screws to mount the
conveyor to the stand.
2.
Mount the Infeed Plate. Remove the three
button head screws from the front of the
conveyor and use them to mount the infeed
plate to the front of the conveyor.
3
Mount the Infeed stacker wheel brackets.
Remove the four button head screws located
on the bottom side of the conveyor closest to
the front. Use the romoved screws to mount
the brackets.
3.
With the brackets in position mount the infeed
stacker wheels to the bracket with the provided
thumbscrews.
3