Formax Cut-True 29A Podręcznik programowania - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik programowania dla Przecinak Formax Cut-True 29A. Formax Cut-True 29A 17 stron. Guillotine cutters

Cut and save

This function allows the user to edit the program by making the back gauge move and cut.

Pressing the Cut & save button activates the screen allowing the user to move into Absolute, Incremental or Manual

Mode.

The dimension where the cut was made is saved automatically as a step dimension in the current program. After each cut,

program automatically moves to the next step.

To exit PRoGRaM MoDe, press ReTURn to return to the Main Menu.

This program allows users to make a sequence of cuts with the same dimension (card size) or 2 alternating dimensions

(card size and gutter/gap).

Start dimension

Card size dimension

Gutter/Gap dimension

sTaRT DIMensIon - the first cut dimension in the card cutting sequence

CaRD sIZe DIMensIon - dimension of card (stripe)

GUTTeR/GaP DIMensIon - dimension of the gutter between cards (if used). If there is no gutter, enter the card dimen-

sion again.