Electrolux ESF 2435 Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zmywarka Electrolux ESF 2435. Electrolux ESF 2435 16 stron.
The control panel
On/Off button
Combination buttons "Cancel" / "A"
In addition to selecting a programme, you can press
these two buttons to adjust the setting of the water
softener and cancelling a pre-set programme.
Indicator lamps:
Shows • Current phase of the selected programme.
• Wash cycle in progress
• Drying in progress
• Programme cycle
ended
How to set the delayed start
The programme start can be delayed by 3, 6 or 9 hours.
1. Press in the On/Off button.
2. Press the delay start button repeatedly, until the
lamp next to the required hours of delay is lit.
3. Press the button for the required programme.
4. After the set delayed start time has elapsed,
the programme starts.
Control lamp
top lamp
middle lamp
lowest lamp
Indicator lamps
delayed start
Water softener
button
Control lamps:
Shows that • On/Off button is pushed in
• Refilling of salt is necessary
• Refilling of the rinse aid
is necessary
Reset the delayed start:
If the programme has not started, you can change
the set time with the delay start button.
Cancelling the delayed start:
If the programme has not started, the delayed start
can be cancelled. Press the delay start button repeat-
edly, until none of the lamps next to the hours are lit.
The required programme starts immediately.
- 6 -
Indicator and
control lamps
A
Delay start
button
Programme
buttons