Electrolux ESF 6162 Instrukcja obsługi - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zmywarka Electrolux ESF 6162. Electrolux ESF 6162 20 stron.
Również dla Electrolux ESF 6162: Instrukcja obsługi (20 strony)

Drukuj stronę

Starting a washing programme

1. Check that the baskets have been

loaded correctly and that the spray

arms can rotate freely

2. Turn on the water tap

3. Close the dishwasher door

4. Press the On/Off button

The On/Off indicator light illuminates.

5. Setting and starting the programme

To select a programme, press the button of the programme

you wish to select, (see "Washing programmes" chart), the

indicator light of the button illuminates and in the digital

display will appear, flashing, the running time of the

programme that has been set (in minutes).

The programme in progress indicator light illuminates.

After about 3 seconds from the last pressure of a button the

programme starts automatically.

In the digital display the running time of the programme is no

longer flashing, the programme in progress indicator light

remains illuminate.

Setting and starting the programme with the

delay start

The setting of the delay start occurs before selecting

the programme

Press the delay start button until the flashing number of the

hours for the delay start will appear in the digital display (from

1h to 19h).

Select a washing programme (see "Washing programmes"

chart). In the digital display will appear, for a moment, the

running time of the programme and then again appears the

selected delay start time.

As soon as the number of hours is displayed without flashing,

the countdown for the delay start is active.

The countdown will decrease with steps of 1 hour.

The opening of the door during the countdown will not modify

the delay start.

Once the delay start has elapsed the programme will start

automatically.

Note: With the delay start function setted, the programme

in progress indicator light is off. Once the countdown of the

delay start has elapsed, the washing programme will start

automatically and the programme in progress indicator light

will illuminate.

Note: it is possible to select a washing programme and the

"delay start" also with the door slightly opened.

In this case the start of the programme or of the countdown

will occur after the closure of the door.

Until that moment it is possible to modify the set made.

6. To interrupt or cancel a washing

programme in progress

Interrupt or cancel a washing programme in progress

ONLY if it's absolutely necessary.

Attention! Hot steam may escape when the door is

opened. Open the door carefully.

To interrupt a washing programme in

progress

a) Open the dishwasher door; the programme will stop.

Close the door; the programme will start from the point at

which it was interrupted.

b) Press the On/Off button, in this case all the indicator lights

turn off. Press the On/Off button again; the programme will

start from the point at which it was interrupted.

To cancel a washing programme in progress

To cancel a washing programme you have to reset the

dishwasher; press simultaneously the function buttons 2 and

3 for about 2 seconds, the indicator light of the running

programme starts flashing for about 2 seconds.

After about 2 seconds all the indicator lights will turn off

(except for the On/Off indicator light and eventually the

rinse aid and salt indicator lights) indicating that the running

programme has been cancelled.

If a new washing programme will be selected, check that

there is detergent in the detergent dispenser.

7. To cancel a "delay start" in progress

To cancel a delay start in progress you have to reset the

dishwasher; follow the same instructions given in "To cancel a

washing programme in progress". Cancelling a delay start

involves also the cancelling of the washing programme set.

In this case you have to set the washing programme again.

8. End of the washing programme

The dishwasher will automatically stop.

The programme in progress indicator light turns off.

The end of programme indicator light is illuminated.

In the digital display appears 0 (remaining programme time),

only in this case the programme has ended.

Switch off the dishwasher by pressing the On/Off button.

Open the dishwasher's door, leave it ajar and wait a few

minutes before removing the dishes; in this way they will be

cooler and the drying will be improved.

9. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should

therefore be allowed to cool down before removing from

the appliance.

Empty the lower basket first and then the upper one; this

will avoid water dripping from the upper basket onto the

dishes in the lower one.

Water may appear on the sides and the door of the

dishwasher as the stainless steel will eventually become

cooler than the dishes.

When the washing programme has finished, it is

recommended that the dishwasher is unplugged and the

water tap turned off.