Ather Dot Instrukcja obsługi Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi Instrukcja obsługi dla Ładowarka Ather Dot. Ather Dot 18 stron. Home charging point

Step 2

Use the C-clamps to fix the Portable Residual

Current Device (PRCD) intact over the

wall surface.

Step 3

Switch ON the mains power.

Via 6A socket

Step 1

Connect the 3 pin plug to the 3 open terminals

of Ather Dot™.

Step 2

Use the C-clamps to hold the PRCD intact over

the wall surface.

Step 3

Plug the charger into the socket using the

connected 3 pin plug and power it ON. An

earthed 3 pin 6A socket is a must for smooth

and safe charging at all times.

Note: In case you would like to install Ather

Dot™ in a shared parking space in apartment

complexes etc., it is advised to install a utility

energy meter and connect the Ather Dot™

through the meter. This will help you to bill the

power consumed by Ather Dot™ and pay back

your apartment society. Alternatively, you could

connect the socket directly to your dedicated

utility meter.

Ideal state of the charger

Solid Green LED- It signifies that the charger is

healthy and is available for charging.