Electrolux ESF2400OH Podręcznik użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zmywarka Electrolux ESF2400OH. Electrolux ESF2400OH 20 stron.
Drukuj stronę
8
www.electrolux.com
5.2 Consumption values
Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the
options, the quantity of dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
5.3 Information for test
institutes
To receive the necessary information for
conducting performance tests (e.g.
according to: EN60436 ), send an email
to:
In your request, include the product
number code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
5.4 Before starting a
programme
Before you start the selected
programme, make sure that:
• The filters are clean and correctly
installed.
• The cap of the salt container is tight.
• The spray arms are not clogged.
• There is enough salt and rinse aid
(unless you use multi-tablets).
• The arrangement of the items in the
baskets is correct.
• The programme is suitable to the type
of load and the degree of soil.
• The correct quantity of detergent is
used.
Duration (min)
1) 2)
140
120
230
75
20
30
Energy (kWh)
1.20
1.05
0.609
0.65
0.39
0.50
5.5 Using a programme
1. Close the appliance door.
2. Open the water tap.
3. Press the On / Off button to activate
the appliance.
4. Press Programme button until the
indicator of the selected programme
comes on.
5. Press Start / Pause button to start
the programme.
When a programme is completed, an
intermittent acoustic signal sounds for a
few seconds.
6. Press On / Off button to deactivate
the appliance.
The appliance turns off automatically
in 15 minutes after the programme
ends.
7. Close the water tap.
Wait until the dishes are cold before you
remove them from the appliance.
There can be water on the
sides and the door of the
appliance.
5.6 Cancelling a programme
1. Press the Start / Pause button.
2. Press and hold Programme button
for 3 seconds.
The appliance comes back to its initial
settings.
Water (l)
9.6
7.7
6.5
5.8
7.0
5.8