Formech 686 Skrócona instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Odkurzacz Formech 686. Formech 686 6 stron.

Icon descriptions

Heater timer

Shows the heater time. Press on the time value to adjust the heat timer on the operation

screen. The time cannot be adjusted in manual mode.

Pre-Stretch

This operation will turn on the compressed air valve to allow air to flow into the sealed cabinet.

This function does not latch. Press & hold to run. The Icon will change colour when pressed.

Vacuum

This operation will latch the pump and the vacuum valve on to apply vacuum to the table

hole. The Icon will change colour when pressed.

Fan timer

This operation will latch the fan on for the time set for loaded settings. The fans will turn off

when the time has elapsed. The Icon will change colour when pressed. Press again at any

time to stop the fan.

Release

This operation will apply compressed air to the table hole. This function does not latch but will

unlatch the vacuum. Press & hold to run. The Icon will change colour when pressed.

Table down

This operation will drive the table down. This function does not latch so it can be used to

lower the table in steps if required. Also see section regarding the setting of table speed.

Save

When in the operation screen this allows the user to save the program or the times just used

onto the memory and store as a new job. This function opens the settings screen. Also used

on settings screens to save memory changes.

Plastics Lab

V1.0 2/8/2018