Ancor 703023 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektronarzędzie Ancor 703023. Ancor 703023 12 stron. 120v two setting heat gun

OPERATOR'S MANUAL: 120V TWO SETTING HEAT GUN

• Be sure your extension cord is properly wired and in good electrical condition. Always

replace a damaged extension cord or have it repaired by a qualified person before

using it.

• Protect your extension cords from sharp objects, excessive heat, and damp or wet

areas.

Recommended Minimum Wire Gauge for Extension Cords (120 Volt)

Name Plate

Amperes

(At Full Load)

0-2.0

2.1-3.4

3.5-5.0

5.1-7.0

7.1-12.0

12.1-16.0

16.1-20.0

SPECIFIC SAFETY RULES FOR HEAT GUNS

WARNING

DO NOT LET COMFORT OR FAMILIARITY WITH PRODUCT (GAINED

FROM REPEATED USE) REPLACE STRICT ADHERENCE TO PRODUCT

SAFETY RULES. If you use this tool unsafely or incorrectly, you

can suffer serious personal injury!

• Do not direct the heat gun airflow at clothing, hair or other body parts. Do not use

as a hair dryer. Heat guns can generate temperatures of 932°F or more of flameless

heat. Contact with the nozzle or air stream may cause serious burns.

• Inspect and know your work area. Check your work area for hidden spaces before

applying heat (behind walls, ceilings, floors, soffits and other panels) that may

contain flammable materials which may ignite when using the heat gun. It may not

be readily apparent if these materials ignite and could result in serious personal

injury and property damage. Avoid excessive heating which may ignite the work area

or material behind it by continuous movement of the heat gun over the work area.

• Keep a fire extinguisher near the work area. Heat guns are capable of igniting

flammable materials in or around the work area.

• Do not use near flammable liquids or in explosive atmospheres containing fumes,

gases, or dust. Flameless heat from the heat gun may ignite the dust or fumes. All

materials or debris which may be ignited should be removed from the work area.

• Shield materials around the heated work area to prevent property damage or fire.

25 Feet

50 Feet

ancorproducts.com | 800.307.6702

Extension Cord Length

75 Feet

100 Feet 150 Feet 200 Feet