Atherton ADE-043A Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt testowy Atherton ADE-043A. Atherton ADE-043A 16 stron. Ip cam tester

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT

TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Do not dispose of your device in a fire.

Do not throw your device in the trash.

Your device contains an internal lithium ion battery and it may require

recycling in accordance with local laws. Contact your local regulatory

authorities for more information.

This device is compliance with RoHS.

WARRANTY VOID IF SEAL IS BROKEN

1. Scope

This specification is used to define the performance of ADE-043A IP Cam Test

Monitor. The Tester benefits users by providing various network protocol compatibilities.

The Tester also operates on both NTSC and PAL system by standard BNC video input.

IP Cam Tester is a versatile video tester for both analog and IP applications.

After you unpack your tester, make sure the following items are included in the box

and in good condition:

˙4.3" IP Cam Test Monitor

˙DC12V Adapter

˙Power Cord

˙BNC Cable

˙CAT5 Cable

˙UTP Terminal Block

˙Wrist Band

˙Carrying Bag

˙User's Manual

˙Warranty Card

Please connect the DC 12V adaptor to the DC jack to charge the battery pack on

the side of the Tester. While battery is charging, the power indicator LED-orange lit.

The LED will be off after the battery fully charged.

The Li-ion battery provided is able to support up to 3 hours of operating time with

PoE off, and takes approximately 6 hours to recharge.