AND UB-542 Instrukcja obsługi - Strona 17
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Monitor ciśnienia krwi AND UB-542. AND UB-542 19 stron. Wrist digital blood pressure monitor
Drukuj stronę
Problem
Nothing appears in the
display, even when the
device is turned on.
The cuff does not
inflate.
The device does not
measure.
Readings are too high
or too low.
Other
Note: If the actions described above do not solve the problem, contact the dealer. Do not attempt to open or repair
this product yourself, as any attempt to do so will make your warranty invalid.
Troubleshooting
Possible Reason
Batteries are drained.
Battery terminals are not in the correct
position.
Battery voltage is too low.
(LOW BATTERY mark) blinks. If the
batteries are drained completely, the mark
does not appear.
The cuff is not applied properly.
You moved your arm or body during the
measurement.
The cuff position is not correct.
The value is different from that measured at
a clinic or doctor's office.
Replace all batteries with new ones.
Reinstall the batteries with negative and
positive terminals matching those indicated
in the battery compartment.
Replace all batteries with new ones.
Apply the cuff correctly.
Make sure you remain very still and quiet
during the measurement.
Sit comfortably and still.
Raise your hand so that the cuff is at the
same level as your heart.
If you have a very weak or irregular heat
beat, the device may have difficulty in
determining your blood pressure.
See "Why Measure Blood Pressure at
Home?".
Remove the batteries. Place them back
properly and try measurement again.
English 16
Recommended Action