formlabs Form 2 Podręcznik - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik dla Drukarki 3D formlabs Form 2. formlabs Form 2 18 stron.
Również dla formlabs Form 2: Skrócona instrukcja obsługi (7 strony)

Drukuj stronę

1. Remove the Resin Cartridge
2. Set up
3. Insert the Tank Resin
4. Print
5. Cleaning
6. Cleaning the Tank Resin

3D PRINT - FormLab 2

Insert the resin tank by aligning the four feet of the resin tank into the four

holes

Push the tank toward the rear of the 3D print

Remove the tank lid

Inspect the resin tank on the bottom side. If you can see some dust or resin,

go to cleaning chapter.

Put the wiper into the wiper mount

Push the wiper against the resin tank

CHAPTER 2. START UP