formlabs Form Wash Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Ultradźwiękowy środek do czyszczenia biżuterii formlabs Form Wash. formlabs Form Wash 13 stron.
Drukuj stronęFORM WASH SYSTEM OVERVIEW
Form Wash automatically cleans uncured liquid resin
from 3D printed parts' surfaces.
1 Basket Mount.
2 Basket.
Holds parts to wash without the build platform.
3 Platform
Mount.
4 Outer Lid.
Limits IPA evaporation.
5 Inner Lid.
A hinged, secondary lid opens and closes to contain IPA
while allowing parts to be lowered or raised from the bucket.
6 Wash Bucket.
The removable container holds a maximum of 8.6 L
of IPA. A rotating impeller at the bottom circulates IPA.
7 Display.
Shows status, time, and options for configuring Form Wash.
8 Knob.
Turn or push to adjust time and to start, pause, or end a wash cycle.
9 Tool Storage.
Each side has designated locations for storing each tool.
10 Power Supply.
11 Isopropyl Alcohol (IPA).
parts' surfaces. Start with 10 L. Concentration must be 90% or higher.
2
A single hook secures the basket to raise and lower.
Holds the build platform when washing parts.
Provides power to Form Wash. Specifications: 24 V, 2 A
Not included. Dissolves liquid resin from printed
Keep the lid closed when not in use.