Athlon TSP1 Instrukcja obsługi / instrukcje dotyczące pielęgnacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi / instrukcje dotyczące pielęgnacji dla Luneta Athlon TSP1. Athlon TSP1 9 stron. Prism scope

A) ILLUMINATION SETTINGS

The illumination switch is set on the left side of the

scope chassis. Athlon offers variable 1-10 brightness

settings and two colors settings (red and green) for

the reticle. Press UP button to turn the unit ON. Press

and hold the UP button for 3 seconds to turn it OFF.

Use the UP button to make the reticle brighter and

the DOWN button to make it dimmer. The unit auto-

matically turns OFF if no adjustments are made in 6

hours. Press UP and DOWN button at the same time to

switch between reticle colors. The unit automatically

sets the illumination at the last setting after a new

battery is installed.

ATHLONOPTICS.COM

Battery Chamber Cap

Illumination Switch

The illumination is powered by a AAA battery. Re-

move the battery chamber cap by turning it count-

er-clockwise and then set the battery with the posi-

tive (+) side facing in. Reinstall the cap by turning it

clockwise, DO NOT OVER TIGHTEN.

3. MAINTAINING YOUR PRISM SCOPE

Disassembling or cleaning the scope internal-

ly will void the warranty. If the scope requires

repairs, please refer to the warranty section for

complete instructions.

The external optical surfaces should occasionally

be wiped clean. Use the lens cloth provided or an

optical quality lens paper to wipe out dust or dirt

on the external lens surface. If large sand parti-

cles or heavy dirt contamination is observed, re-

move using soft brush or by blowing them away.

Apply lens cleaning liquid before wiping off. Al-

ways keep the protective lens covers in place

when the scope is not in use to avoid dust collect-

ing on the surface of the lenses. Store the unit in

a low-humidity environment.

ATHLONOPTICS.COM