Dreame H12 Podręcznik użytkownika - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Odkurzacz Dreame H12. Dreame H12 14 stron. Wet and dry vacuum

Drukuj stronę

Care and Maintenance

Cleaning the Tube and the Dirt Sensor

Remove the Used Water Tank, wipe the tube and the dirt

sensor with a wet cloth before use.

Cleaning the Dust Cup Assembly

1. Press the dust cup release button and

remove the cup.

3. Tap the filter gently or clean it with the

cleaning brush. Rinse the filter and the

dust cup with water.

Note:

•

Cleaning the dust cup after each use or after the amount of dust in the cup reaches the MAX line is

recommended.

•

Replacing the filter every 3 to 6 months is recommended.

Cleaning the Brush Assembly

1. First, press the brush roller cover

release buttons inwards on both sides to

remove the brush roller cover. Next, press

the brush roller release button and the

handle of the brush roller will pop out.

Pull the handle to take out the brush

roller.

2. Take out the filter and the cyclone

assembly from the dust cup, then empty

the cup.

Note: To reduce the risk

of electric shock or injury,

do not rinse the cyclone

assembly with water.

4. Dry the filter and the dust cup

completely before use.

2. Clean out any hair and debris tangled

on the brush roller with the provided

cleaning brush. Rinse the brush roller

with clean water and dry it completely.

Care and Maintenance

3. Wipe the suction inlet with a dry cloth

or wet tissue. Do not rinse the brush

assembly with water.

Note:

•

Clean as needed. Alternating use of the two provided brush rollers is recommended.

•

Replacing the brush roller every 3 to 6 months is recommended.

Cleaning the Soft Roller Brush

1. As shown in the picture, press the

brush roller release button to remove the

roller from the slot.

Cleaning the Motorized Mini-Brush

1. Use a coin as illustrated to rotate the lock counterclockwise, and remove the brush

roller until you hear a click.

2. When it is dirty, rinse the brush roller with clean water. Stand the brush roller upright

until it is fully dry.

4. After cleaning the brush roller, re-install

the brush roller and the brush roller cover.

You will hear a click to indicate that they

are installed in place.

2. When it is dirty, rinse the brush roller

with clean water. Stand the brush roller

upright until it is fully dry.