Carmanah 502 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt oświetleniowy Carmanah 502. Carmanah 502 16 stron. Solar led light

Drukuj stronę
Owner's Manual | Model 502

3.3 Entering the Security Code

After the light is transitioned, you must enter the programming security code before you can make any
changes to the Model 502 light's settings. You must enter the security code every time the light is
transitioned. The security code is 753.
1. Transition the light.
2. Enter the security code: 7 5 3.
7
Once the security code has been successfully entered, you can program the settings listed in Table 3-1:
Programmable Settings.

3.4 Changing the Flash Pattern

You can change the flash pattern of the light by entering a flash code.
1. Transition the light (if required).
2. Enter the security code (if required).
3. Program the new flash pattern by entering the required flash code; see Table 3-3: Model 502 Flash
Codes.
where # is a number of the flash code; Table 3-3: Model 502 Flash Codes
Table 3-3: Model 502 Flash Codes
Flash
Flash
Code
Character
000
Off
001
Fixed
055
Fl 2s
064
Fl 4s
066
Fl 4s
072
Fl 6s
129
Q 1s
147
Q(5) 20s
209
Q 1s
After successfully entering a flash code cover the light with an opaque material to simulate night. The light
will display a quick flash, and then display the programmed flash pattern.
The infrared sensor remains on while the light displays the programmed flash pattern. If required, you can
interrupt the flash pattern at any time by transitioning to light, pressing the Start button, and entering a
different code.
8
© 2008 Carmanah Technologies Corporation
Revised: August 2008
5
FL1
EC1
FL2
EC2
0
0
1
0
0.5
1.5
0.5
3.5
1
3
0.5
5.5
0.3
0.7
0.3
0.7
0.3
0.7
0.15
0.85
3
FL3
EC3
FL4
EC4
0.3
0.7
0.3
0.7
FL5
EC5
Effective
Intensity (cd)
0.25
0.70
0.70
0.80
0.70
0.50
0.3
15.7
0.60
0.70