Forms+Surfaces BUTTLER Instrukcje instalacji
Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Meble zewnętrzne Forms+Surfaces BUTTLER. Forms+Surfaces BUTTLER 2 stron. Strap mount ash receptacle
Drukuj stronęBUTTLER
®
HARDWARE INCLUDED
collar screw lock
1/2" wide plastic-coated stainless steel strap
STEP BY STEP
1a (TOP VIEW)
1b (TOP VIEW)
1c (SIDE VIEW)
1d (SIDE VIEW)
Attach strap to collar screw lock
• Slide 1" of plastic-coated stainless steel
strap through end of screw lock and
bend back against itself to secure.
T 800.451.0410 | www.forms-surfaces.com
© 2012 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.
ASH RECEPTACLE
slotted strap connector
Position receptacle and mark straps
• Slide strap through holes in Buttler strap
mount and wrap around pole.
• Mark strap where it meets end of screw
lock.
STRAP MOUNT INSTALLATION INSTRUCTIONS
TOOLS NEEDED
pencil
tape measure
MARK STRAP HERE
MARK STRAP HERE
Mark and cut straps
• Measure 1" back from original marked
location (so strap becomes 1" shorter
than original marked location) and make
new mark to cut. (This allows room for
tightening later).
• Use snips to cut strap at new marked
location.
tin snips
screwdriver
1"
MARK AND
CUT HERE
page 1 of 2 | Rev. 12-17-12